ProCurve 420 Bedienungsanleitung PDF herunterladen (Seite 32)

Software Fixes

■ CLI/Web — Using the CLI interface, invalid IP addresses and host name characters (for

example, @#%^&) can entered for a logging host IP or host name address. (18-00229, 18-

00274)

■ CLI/Web — When the Country Code is not set (the default is 99), the Web interface Port/

Radio Settings page shows an error message and the Maximum Station Data Rates in the drop-

down menu are not completely displayed. (18-00288)

■ CLI/Web — When using the Web interface to update software via TFTP, if a wrong file name

is specified or any user name and password, the access point reboots. (18-00321, 18-00322)

■ CLI/Web — In the Web interface, the Native VLAN ID text field accepts out-of-range values

and invalid characters. The Native VLAN ID is limited to between 1 and 64. (18-00522)

■ SNMP — Using SNMP management tools, the SNMP Server Location (sysLocation of system

Group) cannot accept up to 255 characters. (18-00027)

■ SNMP — When using SNMP management tools, the maximum wireless data transmission

rate (hpdot11OperationalRateSet of enterpriseAPdot11 Group) cannot be set to a new value.

(18-00057)

■ SNMP — The hpdot11WEPDefaultKey11gLength of dot11smt Group can accept the wrong

value. (18-00144)

■ SNMP — The hpdot11WEPDefaultKey11gValue of dot11smt Group can accept the wrong

string length. (18-00145)

■ SNMP — Using SNMP or the CLI interface, the SNMP Server Contact does not show its data

value correctly if the input value is longer than 39 characters. It is recommended to limit the

input value to less than 39 characters. (18-00204, 18-00222, 18-00312)

■ SNMP — Using SNMP management tools, the SNMP Server Location (sysLocation of system

Group) does not show its data value correctly in the CLI if the input value is longer than 40

characters. It is recommended to limit the input value to less than 40 characters. (18-00206,

18-00313)

■ SNMP — If an SNMP management tool is used to set the Country Code (swCountry of

enterpriseApSys Group), the CLI displays various text that does not effect the AP settings.

(18-00258)

■ SNMP — Using SNMP management tools, the access point IP address (netConfigIPAddress

of enterpriseApIpMgt Group) can be set to an invalid address. (18-00259)

■ SNMP — Using SNMP management tools, the gateway IP address (netDefaultGateway of

enterpriseApIpMgt Group) can be set to an invalid address. (18-00260)

■ SNMP — The WEP key length (dot11WEPKeyMappingLength of hpdot11PrivacyTable

Group) cannot be set using SNMP management tools. (18-00261)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37

Keine Kommentare

ProCurve 420 Bedienungsanleitung Seite 32