ProCurve 420 Bedienungsanleitung PDF herunterladen (Seite 29)

Software Fixes

■ SNTP — The access point does not successfully update the system time by broadcasts from

the SNTP server. (18-01073)

■ SNTP — The access point does not include a configurable time update interval for time

updates from an SNTP server. (18-01074)

■ Radio — When multiple SSIDs are created and the primary SSID is not SSID #1, the access

point does not enter into 11g protection mode. (18-01148)

Release 2.1.1

Problems Resolved in Release 2.1.1

■ Radio — The wireless transmission output power is too low when the Antenna Mode is set

to “Single.” (18-01129)

■ CLI/Web — The model number shown in the Web interface is incorrect. The North American

model should be J8130A and the World Wide Model should be J8131A. (18-01137)

■ System — The access point system hangs after running for a few hours when Radius

Accounting is enabled and many clients are associated. (18-01138)

Release 2.1.0

Release 2.1.0 is a major software release for the HP ProCurve Wireless Access Point 420 that obsoletes

software issues from previous releases.

Release 2.0.41

Problems Resolved in Release 2.0.41

■ System — The access point reboots when beacon frames have not been transmitted for

more than 40 seconds due to RF pollution. (18-00929)

(For v2.0.41 software, the access point does not reboot. Event log messages are generated when

beacon frames have not been transmitted for 20 seconds and continue once every minute until

the RF pollution is cleared.)

Release 2.0.40

Problems Resolved in Release 2.0.40

■ CLI/Web — Using the Web interface Security Suite page, a static WEP encryption key value

is not saved properly. To work around the problem, use the CLI to set static keys. (18-00616)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Keine Kommentare

ProCurve 420 Bedienungsanleitung Seite 29