ProCurve 2610-PWR Technical Information PDF herunterladen (Seite 360)

100

101

A-20

File Transfers

Transferring Switch Configurations

Xmodem: Copying a Configuration File from a Serially Connected PC

or Unix Workstation. To use this method, the switch must be connected via

the serial port to a PC or Unix workstation on which is stored the configuration

file you want to copy. To complete the copying, you will need to know the

name of the file to copy and the drive and directory location of the file.

Syntax: copy xmodem startup-config < pc | unix >

For example, to copy a configuration file from a PC serially connected to the

switch:

1. Execute the following command:

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

4. When the download finishes, you must reboot the switch to implement

the newly downloaded OS. To do so, use one of the following commands:

boot system flash < primary | secondary >

Reboots from the selected flash.

-or-

reload

Reboots from the flash image currently in use.

(For more on these commands, refer to “Rebooting the Switch” on page

6-18.)

1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 468 469

Kommentare zu diesen Handbüchern

Keine Kommentare

ProCurve 2610-PWR Technical Information Seite 360

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software ProCurve 2610-PWR